HotpointSpares
Store › UK › Cooker Hood Spares › Cooker Hood Glass Panel

Hotpoint Cooker Hood Glass Panel

The glass or decorative panel on the front or chimney of the cooker hood.

DifficultyModerate
Typical time15 to 45 minutes
ToolsScrewdrivers, Gloves, A helper
Safety. Isolate the hood at its switch or breaker and let the lamp cool. Wiring is mains voltage: if you are not confident, use a qualified person.

Signs it has failed

Check before you buy

What replacing it fixes: if the signs above match your cooker hood and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).

How to replace it

  1. Switch the hood off at the isolator
  2. Remove the fixings and take off the old panel with a helper
  3. Clean the mounting area and fit the new panel
  4. Refit the fixings and check it is secure

Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.

Getting the right part

Panels are cut to size for each model. Match the part number or your model number, and the measurements of the old panel.

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

Part numbers listed for Hotpoint cooker hood glass panel

These are manufacturer part numbers that a UK spares retailer lists as Hotpoint cooker hood glass panel parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part.

Part numberListed asRetailer says it fits
C00299547Hotpoint Extractor Fan Hood Curved Glass—Search on Amazon

Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.

Find it on Amazon

This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.

Search cooker hood glass panel on Amazon

Other cooker hood parts

Cooker Hood Grease Filter

A metal mesh filter that traps grease from the cooking air before it reaches the motor.

Guide, symptoms & how to fit

Cooker Hood Charcoal Filter

On a recirculating hood (no outside vent), absorbs cooking smells before the air is returned to the kitchen.

Guide, symptoms & how to fit

Cooker Hood Bulb

The light on the underside of the hood that lights the hob.

Guide, symptoms & how to fit

Cooker Hood Extractor Motor

Drives the extractor fan that pulls steam and fumes from the cooking area.

Guide, symptoms & how to fit

Cooker Hood Control Switch

The button or slider that controls the fan speeds and the light.

Guide, symptoms & how to fit

Cooker Hood Lamp Cover

The cover or lens that protects the bulb under the cooker hood and spreads the light.

Guide, symptoms & how to fit

Cooker Hood Fascia

The front facing or trim panel on the cooker hood that carries the controls and finish.

Guide, symptoms & how to fit

Cooker Hood Control Board

The electronic control board (PCB) that reads the dials, buttons and sensors and switches the motor, heater, pump and valves.

Guide, symptoms & how to fit