Hotpoint Fridge Freezer Door Seal

The magnetic rubber seal that keeps cold air in and warm air out around the door.

Signs it has failed

• Frost or ice building up around the door edge
• Condensation or water pooling inside or beneath
• The compressor runs constantly
• A gap or a door that does not close firmly

Check before you buy

• Close the door on a sheet of paper: if it slides out easily, the seal is not gripping
• Check the seal for tears, hard sections or mould in the folds
• Check the fridge is level and the door has not dropped

What replacing it fixes: if the signs above match your fridge freezer and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).

How to replace it

1. Warm the new seal in warm water or with a hairdryer so it becomes flexible
2. Pull the old seal out of its channel, or unscrew the retaining strip if there is one
3. Clean the channel
4. Press the new seal in, starting at the top corners
5. Close the door, warm any creases with a hairdryer and let it settle

Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.

Getting the right part

Seals are cut for each door size. Match the part number, or measure the door width and height and compare with the listing.

Part numbers listed for Hotpoint fridge freezer door seal

These are manufacturer part numbers that a UK spares retailer lists as Hotpoint fridge freezer door seal parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part. The retailer lists 60 Hotpoint numbers for this part type; 10 are shown, because most fit only specific models. Search with your model number to narrow it down.

Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.

Find it on Amazon

This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.

Search fridge freezer door seal on Amazon

Other fridge freezer parts