Hotpoint Oven Door Hinge

Holds the door on the appliance and lets it swing open and shut.

Signs it has failed

• A door that sags or does not close squarely
• A clunking or loose feeling when the door opens
• A broken hinge pin or spring
• Water or heat leaking around a door that no longer seals

Check before you buy

• Open the door and lift it gently: movement at the hinge points to wear
• Check the springs, cables or pins for breakage
• Check the door seal is not the real cause of the leak

What replacing it fixes: if the signs above match your oven and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).

How to replace it

1. Unplug the appliance
2. Support the door and remove the fixings or hinge pins as the manual shows
3. Take off the old hinge and fit the new one in the same position
4. Refit the door and check it closes evenly
5. Test a short cycle or heat-up

Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.

Getting the right part

Hinges differ by side, spring and fixing. Match the part number, your model number and whether you need the left or right hand part. Door hinges can be heavy, so support the door while you work.

Part numbers listed for Hotpoint oven door hinge

These are manufacturer part numbers that a UK spares retailer lists as Hotpoint oven door hinge parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part. The retailer lists 60 Hotpoint numbers for this part type; 10 are shown, because most fit only specific models. Search with your model number to narrow it down.

Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.

Find it on Amazon

This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.

Search oven door hinge on Amazon

Other oven parts