Compatible
WD15X27703 Dishwasher Water Valve Assembly GE Hotpoint Dishwashers parts
| Part type | Dishwasher Inlet Valve |
|---|---|
| Made by | Masseld |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WD15X27703 |
| Also listed as | WD15X32008, AP6994873, PS16219694, EAP16219694 |
| Model numbers named in the listing | GDF510PSR3SS, GDT550PYR3FS, GDF535PSR3SS, GDT650SYV0FS, GDF510PSR0SS, GDF535PGR0WW, XDF350PSR1SS, GDF450PSR3SS, GDF511PSR3SS, GDT630PYR0FS |
What it fixes
The solenoid valve that lets water into the dishwasher and closes when it is full. Fit it if you see:
- The dishwasher does not fill or fills slowly
- It keeps filling or leaks water into the base
- A humming valve with no water
- A flood warning or the cycle stopping early
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: GDF510PSR3SS, GDT550PYR3FS, GDF535PSR3SS, GDT650SYV0FS, GDF510PSR0SS, GDF535PGR0WW, XDF350PSR1SS, GDF450PSR3SS, GDF511PSR3SS, GDT630PYR0FS
From the seller’s listing:
- 【Wide Compatibility】The WD15X27703 water inlet valve is compatible with GE, Hotpoint Monogram, Café, Haier and other brand Dishwashers. It fits the following dishwasher models: GDF510PSR3SS GDT550PYR3FS GDF535PSR3SS GDT650SYV0FS…
- 【Replacement Parts Number】This WD15X27703 water inlet valve is a direct replacement for the WD15X32008, 265D3719G002, 4964202, AP6994873, PS16219694 and EAP16219694 water inlet valves,Please verify your dishwasher water inlet valve's part…
Other part numbers it is listed as replacing: WD15X32008, AP6994873, PS16219694, EAP16219694. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the dishwasher and turn the water off
- Remove the kickboard or lower panel to reach the valve
- Disconnect the hose, unplug the coil and release the valve
- Fit the new valve and reconnect everything
- Turn the water on slowly, check for leaks and run a test cycle
Difficulty: Moderate. Typical time: 30 to 60 minutes. Read the full dishwasher inlet valve guide, including checks to run before you buy.
Safety. Unplug the dishwasher and turn the water off before you start. Keep towels and a tray ready for trapped water.
Other dishwasher inlet valve listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
