Compatible
WE03X23956 Dryer Top Bearing & Slides WE03X37319 WE03X37320 for GE Hotpoint
FIXIT PARTS
View on Amazon
Compatible
WE49X20697 Dryer Bearing Kit for GE Hotpoint AP5806906 PS9493092 PS960316 | Replaces AP3790641 WE3M26…
| Part type | Dryer Drum Bearing |
|---|---|
| Made by | PartsBroz |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WE49X20697 |
| Also listed as | AP5806906, PS9493092, PS960316, AP3790641, WE09X27634, WE03M0020, WE03X29897, WE12M29, WE12M22, WE09X20441 |
| Model numbers named in the listing | DBXR463ED2WW, GTDP490ED0WS, DBXR463EG6WW, DBSR453EB2WW, DBXR463ED1WW, DRSR483ED1WW, DJXR433EC3WW, DBLR333EE2WW, DBXR463ED2CC, DBXR463EG1WW |
What it fixes
The bearing or support that holds the rear of the drum and lets it turn smoothly. Fit it if you see:
- A loud squealing, grinding or rumbling as the drum turns
- The drum feels rough or loose when turned by hand
- Black dust or marks at the rear of the drum
- A burning smell from friction
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: DBXR463ED2WW, GTDP490ED0WS, DBXR463EG6WW, DBSR453EB2WW, DBXR463ED1WW, DRSR483ED1WW, DJXR433EC3WW, DBLR333EE2WW, DBXR463ED2CC, DBXR463EG1WW
From the seller’s listing:
- This WE49X20697 Dryer Repair Kit is compatible with General Electric GE dryer drum bearing kit, Hotpoint dryer parts and Kenmore.
- To ensure a perfect fit for General Electric dryer parts for GE dryer front bearing kit make sure part number and your model are compatible. Popular models are: DBSR453EB2WW, DBXR463ED1WW, DBXR463ED2WW, DHDSR46EE1WW, DRSR483ED1WW,…
Other part numbers it is listed as replacing: AP5806906, PS9493092, PS960316, AP3790641, WE09X27634, WE03M0020, WE03X29897, WE12M29, WE12M22, WE09X20441. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the dryer
- Remove the top, front and drum as the model requires
- Remove the old bearing or rear support from the back panel
- Fit the new bearing or kit and lubricate where the instructions say
- Refit the drum, belt and panels and test
Difficulty: Hard. Typical time: 90 to 180 minutes. Read the full dryer drum bearing guide, including checks to run before you buy.
Safety. Unplug the dryer before you start (and switch off the breaker if it is hard-wired). A blocked vent is a fire risk, so always clear the cause of any overheating.
Other dryer drum bearing listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
