Compatible
WE25X205 WE25M40 Dryer Drum Bearing Replacemnt Kit Contains WE12M29 Drum Drive Belt WE1M333 Drum Bearing…
| Part type | Dryer Drum Roller |
|---|---|
| Made by | Cykemo |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WE25X205 |
| Also listed as | WE25M40, WE12M29, AP2619300, PS267529, WE03X29897, WE01X0462, WE01X0463, WE02X0195, WE03M0015, WE03M0065, WE03X0022, WE03X0028, WE03X0031, WE03X0035 |
| Model numbers named in the listing | DBXR463ED1WW, DCVH515EF1WW, DCVH680EJ1WW, HTDP120ED0WW, HTDX100EM1WW, NBXR453GV1AA |
What it fixes
The small wheels that carry the weight of the drum and let it turn smoothly. Fit it if you see:
- A squealing, rumbling or thumping noise as the drum turns
- The noise follows the drum speed
- Black dust or marks near the rollers
- The drum feels rough when turned by hand
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: DBXR463ED1WW, DCVH515EF1WW, DCVH680EJ1WW, HTDP120ED0WW, HTDX100EM1WW, NBXR453GV1AA
From the seller’s listing:
- 🔧[Product Replace Part No.]: WE25M40 Dryer Drum Bearing replaces part number: AP2619300, WE25X205, 784658, AH267529, DE725, EA267529, PS267529, WE01X0462, WE01X0463, WE02X0195, WE03M0015, WE03M0065, WE03X0022, WE03X0028, WE03X0031,…
- 🔧[Product Compatible Model]: Dryer bearing drum replacement kit is compatible with General Electric, Hotpoint, Kenmore and others; such as: 633615, 66361T5WW, 66461T3WW, 66461T3WW, DBXR463ED1WW, DCVH515EF1WW, DCVH680EJ1WW,HTDP120ED0WW,…
Other part numbers it is listed as replacing: WE25M40, WE12M29, AP2619300, PS267529, WE03X29897, WE01X0462, WE01X0463, WE02X0195, WE03M0015, WE03M0065, WE03X0022, WE03X0028, WE03X0031, WE03X0035. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the dryer
- Remove the top and front panels to expose the drum support
- Support the drum and take the belt off
- Remove the old rollers and shafts and fit the new ones
- Refit the belt and panels and test
Difficulty: Moderate. Typical time: 60 to 90 minutes. Read the full dryer drum roller guide, including checks to run before you buy.
Safety. Unplug the dryer before you start (and switch off the breaker if it is hard-wired). A blocked vent is a fire risk, so always clear the cause of any overheating.
Other dryer drum roller listings
Genuine made by Hotpoint / GE Compatible made by another company to fit