Compatible
WE03X31620 WE12X20395 Dryer Idler Pulley Compatible with GE Hotpoint Clothes GE Dryer Pulley Wheel…
| Part type | Dryer Idler Pulley |
|---|---|
| Made by | Aocies |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WE03X31620 |
| Also listed as | WE12X20395, WE12M32, WE12M0008, AP6997706, PS16542497 |
| Model numbers named in the listing | PTD70GBPT0DG, PFDS455GL0MV, PTD60EBPR0DG, PTD60EBSR0WS, PTD60GBSR0WS, HTX21GASK1WW, PTD60GBPR0DG, PTD70EBST0WS, PTD70EBPT0DG, PTD70GBST0WS |
What it fixes
The spring-loaded pulley that keeps the drive belt tight against the motor. Fit it if you see:
- A squealing or chirping noise from the front of the dryer
- A thumping noise with each turn
- A belt that keeps slipping off or wearing quickly
- A pulley that wobbles or no longer spins freely
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: PTD70GBPT0DG, PFDS455GL0MV, PTD60EBPR0DG, PTD60EBSR0WS, PTD60GBSR0WS, HTX21GASK1WW, PTD60GBPR0DG, PTD70EBST0WS, PTD70EBPT0DG, PTD70GBST0WS
From the seller’s listing:
- 【COMPATIBLE WITH】WE03X31620 dryer idler pulley wheel, replacing WE12M32, WE12M0008, AP6997706, WE12X20395, PS16542497, etc., is suitable for use raplacement with GE Dryer Pulley and Hotpoint dryers to restore smooth operation. GE Hotpoint…
Other part numbers it is listed as replacing: WE12X20395, WE12M32, WE12M0008, AP6997706, PS16542497. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the dryer and open the cabinet for belt access
- Release the belt tension and remove the belt
- Unscrew or unclip the old idler pulley assembly
- Fit the new one and refit the belt
- Close up and test
Difficulty: Moderate. Typical time: 45 to 75 minutes. Read the full dryer idler pulley guide, including checks to run before you buy.
Safety. Unplug the dryer before you start (and switch off the breaker if it is hard-wired). A blocked vent is a fire risk, so always clear the cause of any overheating.
Other dryer idler pulley listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
