Compatible
WB44K10005 wb30x46987 WB44K10001 Oven Bake Element Fit for GE Hotpoint Americana Oven model…
| Part type | Oven Bake Element |
|---|---|
| Made by | Beaquicy |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WB44K10005 |
| Also listed as | WB44K10001, AP2030964, PS249238, EAP249238 |
| Model numbers named in the listing | RB526H3WW, RB757BH1WH, RB787WH1WW, RB787CH2CC, JBS03H2WH, ABS200P1WW, JB14Y1DC |
What it fixes
The electric heating element at the base or around the fan that heats the oven. Fit it if you see:
- The oven does not heat or heats unevenly
- Visible blistering, breaks or a part of the element not glowing
- Long cooking times
- A burnt smell or tripping electrics
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: RB526H3WW, RB757BH1WH, RB787WH1WW, RB787CH2CC, JBS03H2WH, ABS200P1WW, JB14Y1DC
From the seller’s listing:
- 【HIGHLIGHT】--- WB44K10005 ge range bake element is at the bottom of the oven and supplies the heat for baking. It only fits for electric ovens and electric ranges. The product has push on wire terminals and terminals are male spade…
- 【WIDE COMPATIBLE】--- Beaquicy WB44K10005 Oven Bake Element can replacement for Americana GE,Hotpoint,Kenmore Oven.►Replaces Part Numbers:WB44K10001, 824269, AP2030964, PS249238, EAP249238, 36261101000, 36261101001, 36261108000,…
Other part numbers it is listed as replacing: WB44K10001, AP2030964, PS249238, EAP249238. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Isolate the oven at the breaker and wait for it to cool
- Remove shelves and any rear panel or cover
- Undo the screws holding the element and pull it forward gently
- Photograph and disconnect the terminals
- Connect the new element, refit it and test
Difficulty: Moderate. Typical time: 30 to 60 minutes. Read the full oven bake element guide, including checks to run before you buy.
Safety. Isolate the oven at its breaker and let it cool fully. Wiring is household voltage: if you are not confident, use a qualified person.
Other oven bake element listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
