Compatible
WB2X9154 XL44 WB13K10027 Gas Range Oven Stove Round Ignitor Kit 3-1/2'' long 120V 2.5-3.0 A for GE Hotpoint…
| Part type | Oven Igniter |
|---|---|
| Made by | Salugre |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WB13K10027 |
| Also listed as | WB02X9154, WB13K3, WB13K4, WB00X6640, WB13K0001, WB13K0003, WB13K0004, WB13K04, WB13K1, AP2014008, PS243425, EAP243425 |
What it fixes
On a gas oven, the electric igniter that glows hot to light the burner. Fit it if you see:
- The oven does not light or takes a long time
- The igniter glows but the burner does not ignite
- The igniter looks cracked or has a visible break
- Uneven heating after lighting
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
From the seller’s listing:
- 【Replaceable Models】The GR403 Oven Ignitor replaces a wide range of part numbers: xl44, 300259, 319887, 327617, 330689, 337263, 4336387, 4338008, WB00X6640, WB02X9154, WB13K0001, WB13K0003, WB13K0004, WB13K04, WB13K1, WB13K10027, WB13K3,…
- 【Compatible Brands】This ignitor kit is compatible with GE, Hotpoint, Kenmore, Roper, and Whirlpool gas ranges and ovens. Because ignitors are model-specific, please email us your range model number if you are not sure about compatibility
Other part numbers it is listed as replacing: WB02X9154, WB13K3, WB13K4, WB00X6640, WB13K0001, WB13K0003, WB13K0004, WB13K04, WB13K1, AP2014008, PS243425, EAP243425. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Isolate the oven at the power supply and let it cool
- Remove the oven floor and burner baffle
- Disconnect the igniter wires and release the mounting bracket
- Fit the new igniter and reconnect
- Refit the baffle and floor and test
Difficulty: Moderate. Typical time: 30 to 60 minutes. Read the full oven igniter guide, including checks to run before you buy.
Safety. Isolate the oven at its breaker and let it cool fully. Wiring is household voltage: if you are not confident, use a qualified person.
Other oven igniter listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
