Compatible

Certified Appliance Accessories 51001 8" 6-Turn 2,350-Watt Replacement Range Surface Burner Element for GE &…

Part type	Range Surface Element
Made by	Certified Appliance Accessories
Genuine or compatible	Compatible equivalent (made by another company)
Main part number	WB30M2

View on Amazon

What it fixes

The electric heating ring or coil that heats a pan on an electric range or range. Fit it if you see:

A ring that does not heat or only heats in places
Visible breaks, blistering or bright hot spots
A burning smell or tripping electrics
A ring that sags or no longer sits flat

Will it fit your appliance?

This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.

From the seller’s listing:

Directly replaces a single 8" 6-turn WB30M2 surface element
Fits select GE, Hotpoint, Kenmore (1995 to 2003), Roper (1990+) & Monogram electric ranges

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

How to fit it

Isolate the range and let it cool
On a plug-in coil, lift the element slightly and pull it straight out of the socket
Push the new coil firmly into the socket and lower it flat
On a fixed or ceramic range, a qualified electrician or engineer should do the replacement

Difficulty: Easy for plug-in coils; hard for fixed hobs. Typical time: 5 to 15 minutes for plug-in coils. Read the full range surface element guide, including checks to run before you buy.

Safety. Turn off and let the range cool. Anything touching the gas supply must be done by a licensed gas technician. If you smell gas, turn the supply off, ventilate and call your gas emergency number.