Compatible
WB30M2 8" Range Surface Burner Element for GE Hotpoint Kenmore Range Oven Cooktop Stove by Techecook - 6…
| Part type | Range Surface Element |
|---|---|
| Made by | Techecook |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WB30M2 |
| Also listed as | WB30K5027, WB30M0002, AP2634728, WB30X5072, WB30X5120, WB30X5122, WB30X5130, EAP243868, PS243868 |
| Model numbers named in the listing | RB533GV2, JBS17GS2, LEB316GT1WH, JSS16V1WH, JP328CF1CC, JBP25GS2, JP301BN3BC, RB767GN2, RB755GN3 |
What it fixes
The electric heating ring or coil that heats a pan on an electric range or range. Fit it if you see:
- A ring that does not heat or only heats in places
- Visible breaks, blistering or bright hot spots
- A burning smell or tripping electrics
- A ring that sags or no longer sits flat
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: RB533GV2, JBS17GS2, LEB316GT1WH, JSS16V1WH, JP328CF1CC, JBP25GS2, JP301BN3BC, RB767GN2, RB755GN3
From the seller’s listing:
- Perfect Compatibility: WB30M2 Replaces 340524 WB30K5027 WB30M0002 WB30M2-25PK WB30X5072 WB30X5120 WB30X5122 WB30X5130 2797 AP2634728 EAP243868 PS243868 AGE23242 PD00001053 0459036+91382. Fit GE/Hotpoint/Kenmore Range/Oven/Cooktop Models:…
Other part numbers it is listed as replacing: WB30K5027, WB30M0002, AP2634728, WB30X5072, WB30X5120, WB30X5122, WB30X5130, EAP243868, PS243868. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Isolate the range and let it cool
- On a plug-in coil, lift the element slightly and pull it straight out of the socket
- Push the new coil firmly into the socket and lower it flat
- On a fixed or ceramic range, a qualified electrician or engineer should do the replacement
Difficulty: Easy for plug-in coils; hard for fixed hobs. Typical time: 5 to 15 minutes for plug-in coils. Read the full range surface element guide, including checks to run before you buy.
Safety. Turn off and let the range cool. Anything touching the gas supply must be done by a licensed gas technician. If you smell gas, turn the supply off, ventilate and call your gas emergency number.
Other range surface element listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
