Genuine
GE WH43X30957 Washer Agitator Assembly Replaces: WH43X25304, WH43X26845
| Part type | Washer Agitator Repair Kit |
|---|---|
| Made by | GE |
| Genuine or compatible | Genuine (Hotpoint / GE brand) |
| Main part number | WH43X30957 |
| Also listed as | WH43X25304, WH43X26845 |
What it fixes
The small drive parts (often called dogs or cogs) that connect the agitator to the drive shaft on a top-loading washer. Fit it if you see:
- The agitator no longer moves but the drum still spins
- A clicking or ratcheting sound during the wash
- The agitator turns freely by hand without catching
- Clothes barely move even on a heavy cycle
Will it fit your appliance?
This is a genuine part, which is built for the Hotpoint and GE models it is listed for. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
From the seller’s listing:
- The WH43X30957 Agitator Assembly is a genuine Original Equipment Manufacturer (Authentic OEM) part from General Electric that fits various models from the following brands of washers: GE, Hotpoint. Make sure to check below for your part…
- The GE WH43X30957 Washer Agitator Assembly (Replaces: WH43X25304, WH43X26845) rotates back and forth to move the clothes inside the tub to clean the load
Other part numbers it is listed as replacing: WH43X25304, WH43X26845. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the washer
- Remove the agitator cap, then the bolt beneath it
- Lift the agitator off the shaft (a puller may be needed if stuck)
- Replace the worn dogs or cogs with the new kit parts
- Refit the agitator, bolt and cap, then run a test wash
Difficulty: Easy to moderate. Typical time: 20 to 45 minutes. Read the full washer agitator repair kit guide, including checks to run before you buy.
Safety. Unplug the machine and turn the water off before you start. Water and electricity: keep the floor dry and never work on a live machine.
Other washer agitator repair kit listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
