Compatible
OEM WH03X32218 Washer Motor Pulley & Belt & Nut Set Compatible with GE Hotpoint, Replacement Part WH07X24695…
| Part type | Washer Motor |
|---|---|
| Made by | SUENTINSE |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WH03X32218 |
| Also listed as | WH07X24695, WH39X27601, WH49X25378, AP7034989, PS16619249, EAP16619249 |
| Model numbers named in the listing | ETW485ASW0WB, GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW220ACK4WW, GTW220ACK5WW, GTW220ACK6WW, GTW220ACK7WW, GTW220ACW0WW, GTW325ASW0WW |
What it fixes
The electric motor that spins the drum for washing and spinning. Fit it if you see:
- The drum does not turn although the machine fills and drains
- A burning smell or smoke from the motor area
- A loud humming, grinding or scraping when the motor runs
- The machine trips the electrics when it starts to spin
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: ETW485ASW0WB, GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW220ACK4WW, GTW220ACK5WW, GTW220ACK6WW, GTW220ACK7WW, GTW220ACW0WW, GTW325ASW0WW
From the seller’s listing:
- 【Replaceable Models】WH03X32218 Washer Motor Pulley & Belt & Nut Set replaces these parts: WH07X24695, WH39X27601, WH49X25378, AP7034989, PS16619249, EAP16619249
- 【Replaceable Models (GE)】ETW485ASW0WB,GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW220ACK4WW, GTW220ACK5WW, GTW220ACK6WW, GTW220ACK7WW, GTW220ACW0WW, GTW325ASW0WW, GTW330ASK0WW, GTW330ASK1WW, GTW330ASK2WW, GTW330ASK3WW, GTW330ASK4WW,…
Other part numbers it is listed as replacing: WH07X24695, WH39X27601, WH49X25378, AP7034989, PS16619249, EAP16619249. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the machine and turn the water off
- Remove the back panel and the drive belt
- Photograph and unplug the motor wiring
- Remove the motor fixings and lift out the old motor
- Fit the new motor, refit the belt and wiring and run a test wash
Difficulty: Moderate to hard. Typical time: 60 to 120 minutes. Read the full washer motor guide, including checks to run before you buy.
Safety. Unplug the machine and turn the water off before you start. Water and electricity: keep the floor dry and never work on a live machine.
Other washer motor listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
