Compatible
WH13X10024 Washer Water Inlet Valve by Seentech - Compatible with General Electric Hotpoint Washing Machine -…
| Part type | Washer Water Inlet Valve |
|---|---|
| Made by | Seentech |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WH13X10024 |
| Also listed as | WH13X0086, WH13X10019, WH13X0087, AP3861119, PS1155105, WH13X10004 |
What it fixes
The solenoid valve that opens to let water into the machine at the right moment and closes it afterwards. Fit it if you see:
- The machine does not fill or fills very slowly
- It keeps filling when switched off, or water drips into the drum
- A humming valve with no water, or visible leaks at the back
- Detergent drawer leaks or the wrong compartments filling
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
From the seller’s listing:
- MODEL NUMBER: WH13X10024 Washer Inlet Water Valve.
- BRAND NAME COMPATIBILITY: It is made exactly fit for most top name brand (General Electric, Hotpoint). Replaces part numbers: WH13X86, 1159233, AH1155105, EA1155105, PS1155105, WH13X0086, WH13X0087, WH13X10004, WH13X10019, WH13X87,…
Other part numbers it is listed as replacing: WH13X0086, WH13X10019, WH13X0087, AP3861119, PS1155105, WH13X10004. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the machine and turn the water supply off
- Remove the top panel and note which hoses connect to which outlets
- Unplug the coil connectors and release the hose clamps
- Unscrew the valve from the back panel and swap in the new one
- Reconnect everything, turn the water on slowly and check for leaks
Difficulty: Moderate. Typical time: 30 to 60 minutes. Read the full washer water inlet valve guide, including checks to run before you buy.
Safety. Unplug the machine and turn the water off before you start. Water and electricity: keep the floor dry and never work on a live machine.
Other washer water inlet valve listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
