HotpointSpares
Store › UK › Hob Spares › Hob Igniter

Hotpoint Hob Igniter

The spark electrode that lights the gas burners on a hob.

DifficultyModerate
Typical time20 to 40 minutes
ToolsScrewdriver, Dry brush
Safety. Turn off and let the hob cool. Anything touching the gas supply must be done by a Gas Safe registered engineer. If you smell gas, turn the supply off, ventilate and call your gas emergency number.

Signs it has failed

Check before you buy

What replacing it fixes: if the signs above match your hob and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).

How to replace it

  1. Turn off the gas and isolate power if hard-wired
  2. Lift off the burner cap and crown
  3. Release the electrode and its connector
  4. Fit the new electrode and reconnect
  5. Refit the burner parts and test

Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.

Getting the right part

Igniters vary by length, shape and connector. Gas appliances should be serviced by a Gas Safe registered engineer if you are unsure.

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

Part numbers listed for Hotpoint hob igniter

These are manufacturer part numbers that a UK spares retailer lists as Hotpoint hob igniter parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part. The retailer lists 36 Hotpoint numbers for this part type; 10 are shown, because most fit only specific models. Search with your model number to narrow it down.

Part numberListed asRetailer says it fits
C00237570Hotpoint Spark Ignition Push Button Switch—Search on Amazon
C00045793Hotpoint Spark Ignition Button—Search on Amazon
C00731631Hotpoint Gas Hob Ignition Spark Generator—Search on Amazon
C00052951Hotpoint Ignition Spark Plug Electrode—Search on Amazon
C00229995Hotpoint Ignition Spark Generator—Search on Amazon
C00269641Hotpoint Ignition Spark Plug Electrode—Search on Amazon
C00091349Hotpoint Ignition Microswitch Switch—Search on Amazon
C00252598Hotpoint Spark Generator—Search on Amazon
C00146196Hotpoint Cooker Grill Spark Electrode Gas Igniter—Search on Amazon
C00199716Hotpoint Spark Ignition Switch Push Button Kit—Search on Amazon

Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.

Find it on Amazon

This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.

Search hob igniter on Amazon

Other hob parts

Hob Burner

The burner cap and crown that spread the gas flame under the pan.

Guide, symptoms & how to fit

Hob Control Knob

The control knob on a hob or range that sets the heat.

Guide, symptoms & how to fit

Hob Pan Support

The cast or wire support that holds pans above the burners.

Guide, symptoms & how to fit

Electric Hob Ring

The electric heating ring or coil that heats a pan on an electric hob or range.

Guide, symptoms & how to fit