HotpointSpares
Store › UK › Hob Spares › Hob Pan Support

Hotpoint Hob Pan Support

The cast or wire support that holds pans above the burners.

DifficultyVery easy
Typical timeUnder 5 minutes
ToolsNone
Safety. Turn off and let the hob cool. Anything touching the gas supply must be done by a Gas Safe registered engineer. If you smell gas, turn the supply off, ventilate and call your gas emergency number.

Signs it has failed

Check before you buy

What replacing it fixes: if the signs above match your hob and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).

How to replace it

  1. Let the hob cool completely
  2. Lift off the old support
  3. Place the new one so it sits flat and level
  4. Check pans sit evenly

Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.

Getting the right part

Pan supports differ by size and shape. Match the part number or your model number.

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

Part numbers listed for Hotpoint hob pan support

These are manufacturer part numbers that a UK spares retailer lists as Hotpoint hob pan support parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part. The retailer lists 18 Hotpoint numbers for this part type; 10 are shown, because most fit only specific models. Search with your model number to narrow it down.

Part numberListed asRetailer says it fits
C00382262Hotpoint Pan Support Grid Rubber Feet, Pack of 4—Search on Amazon
C00114523Hotpoint Hob Pan Support Grid—Search on Amazon
C00272205Hotpoint Double Hob Pan Support—Search on Amazon
C00110497Hotpoint Double Pan Support Grid—Search on Amazon
C00193406Hotpoint Pan Support Grid, Single Cast Iron—Search on Amazon
C00860219Hotpoint Pan Support Grid—Search on Amazon
C00093651Hotpoint Hob Double Pan Support Stand—Search on Amazon
C00303496Hotpoint Gas Hob Pan Stand Support—Search on Amazon
C00085446Hotpoint Hob Pan Support Stand—Search on Amazon
C00279178Hotpoint Hob Pan Support Double Stand—Search on Amazon

Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.

Find it on Amazon

This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.

Search hob pan support on Amazon

Other hob parts

Hob Burner

The burner cap and crown that spread the gas flame under the pan.

Guide, symptoms & how to fit

Hob Control Knob

The control knob on a hob or range that sets the heat.

Guide, symptoms & how to fit

Hob Igniter

The spark electrode that lights the gas burners on a hob.

Guide, symptoms & how to fit

Electric Hob Ring

The electric heating ring or coil that heats a pan on an electric hob or range.

Guide, symptoms & how to fit