HotpointSpares
Store › UK › Tumble Dryer Spares › Tumble Dryer Capacitor

Hotpoint Tumble Dryer Capacitor

A start capacitor that gives the motor the push it needs to begin turning.

DifficultyModerate
Typical time20 to 45 minutes
ToolsScrewdrivers, Insulated screwdriver to discharge
Safety. Unplug the dryer before you start (and switch off the breaker if it is hard-wired). A blocked vent is a fire risk, so always clear the cause of any overheating.

Signs it has failed

Check before you buy

What replacing it fixes: if the signs above match your tumble dryer and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).

How to replace it

  1. Unplug the dryer and wait several minutes
  2. Remove the panel to reach the capacitor
  3. Discharge the old capacitor safely, photograph the wiring and disconnect it
  4. Fit the new capacitor with the same microfarad and voltage rating
  5. Refit the panel and test

Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.

Getting the right part

The capacitance (microfarads) and voltage must match the old capacitor exactly. Both are printed on the case.

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

Part numbers listed for Hotpoint tumble dryer capacitor

These are manufacturer part numbers that a UK spares retailer lists as Hotpoint tumble dryer capacitor parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part. The retailer lists 15 Hotpoint numbers for this part type; 10 are shown, because most fit only specific models. Search with your model number to narrow it down.

Part numberListed asRetailer says it fits
C00864119Hotpoint 8.5uF CapacitorAriston, Hotpoint, IndesitSearch on Amazon
C00279233Hotpoint 7 uf CapacitorAriston, IndesitSearch on Amazon
C00279463Hotpoint Capacitor 9ufAriston, Creda, Export, Hotpoint, IndesitSearch on Amazon
C00275351Hotpoint Capacitor—Search on Amazon
C00194453Hotpoint CapacitorAriston, Cannon, Creda, Crusader, Export, Hotpoint, Indesit, ProlineSearch on Amazon
CAP07Hotpoint CapacitorCannon, Creda, Hotpoint, IndesitSearch on Amazon
C00095649Hotpoint Capacitor 7.5 uFAriston, Creda, Crusader, Export, Hotpoint, Indesit, ProlineSearch on Amazon
C00095604Hotpoint Capacitor KitCreda, Hotpoint, IndesitSearch on Amazon
481010743850Hotpoint Capacitor 10 uf—Search on Amazon
C00728617Hotpoint Motor (Use 8 .5Uf Capacitor) 3 Wires—Search on Amazon

Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.

Find it on Amazon

This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.

Search tumble dryer capacitor on Amazon

Other tumble dryer parts

Tumble Dryer Drive Belt

The long belt that loops around the drum and is turned by the motor, so the drum tumbles.

Guide, symptoms & how to fit

Tumble Dryer Heater Element

Provides the heat that dries the clothes.

Guide, symptoms & how to fit

Tumble Dryer Thermostat

Thermostats and thermal cut-outs limit the dryer temperature and switch the heater off if it overheats.

Guide, symptoms & how to fit

Tumble Dryer Condenser

On a condenser dryer, the heat exchanger that cools the humid air so the moisture drains into the tank or away.

Guide, symptoms & how to fit

Tumble Dryer Door Seal

The seal around the dryer door that stops warm, damp air and lint escaping.

Guide, symptoms & how to fit

Tumble Dryer Filter

Catches fluff from clothes so it does not clog the vent or the heat exchanger.

Guide, symptoms & how to fit

Tumble Dryer Drum Rollers

The small wheels that carry the weight of the drum and let it turn smoothly.

Guide, symptoms & how to fit

Tumble Dryer Motor

Turns the drum (through the belt) and drives the fan that circulates air.

Guide, symptoms & how to fit

Tumble Dryer Drum Bearing

The bearing or support that holds the rear of the drum and lets it turn smoothly.

Guide, symptoms & how to fit

Tumble Dryer Tension Pulley

The spring-loaded pulley that keeps the drive belt tight against the motor.

Guide, symptoms & how to fit

Tumble Dryer Control Board

The electronic control board (PCB) that reads the dials, buttons and sensors and switches the motor, heater, pump and valves.

Guide, symptoms & how to fit

Tumble Dryer Door Handle

The handle (or door catch) used to open and close the appliance door.

Guide, symptoms & how to fit

Tumble Dryer Door Hinge

Holds the door on the appliance and lets it swing open and shut.

Guide, symptoms & how to fit