HotpointSpares
Store › UK › Tumble Dryer Spares › Tumble Dryer Drive Belt

Hotpoint Tumble Dryer Drive Belt

The long belt that loops around the drum and is turned by the motor, so the drum tumbles.

DifficultyModerate
Typical time45 to 90 minutes
ToolsScrewdrivers or nut drivers, Putty knife for top clips (US)
Safety. Unplug the dryer before you start (and switch off the breaker if it is hard-wired). A blocked vent is a fire risk, so always clear the cause of any overheating.

Signs it has failed

Check before you buy

What replacing it fixes: if the signs above match your tumble dryer and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).

How to replace it

  1. Unplug the dryer
  2. Remove the top, front or back panel as needed for your model
  3. Release the tension on the idler pulley and remove the old belt
  4. Loop the new belt around the drum with the ribbed side against the drum, then around the idler and the motor pulley
  5. Check the belt sits straight, refit the panels and test

Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.

Getting the right part

Belts are length- and rib-specific. Match the part number or measure the old belt, and check it is listed for your model.

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

Part numbers listed for Hotpoint tumble dryer drive belt

These are manufacturer part numbers that a UK spares retailer lists as Hotpoint tumble dryer drive belt parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part.

Part numberListed asRetailer says it fits
C00116358Hotpoint 1991mm 6 Rib Belt 6PHE 1991—Search on Amazon
C00297210Hotpoint Drive Belt—Search on Amazon
C00145707Hotpoint BeltAriston, Creda, Hotpoint, Indesit, ProlineSearch on Amazon
480112101469Hotpoint Belt 7PH 2010—Search on Amazon
C00109620Hotpoint Belt— Serial-number dependentSearch on Amazon
C00095658Hotpoint BeltAriston, Creda, Crusader, Electra, Export, Hotpoint, Indesit, Jackson, ProlineSearch on Amazon
C00209186Hotpoint Belt—Search on Amazon
C00112736Hotpoint BeltCreda, Crusader, Electra, English Electric, Export, Hotpoint, Jackson, Parnall Serial-number dependentSearch on Amazon
C00095613Hotpoint Belt 1900 H7— Serial-number dependentSearch on Amazon
C00146610Hotpoint Drive BelthotpointSearch on Amazon

Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.

Find it on Amazon

This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.

Search tumble dryer drive belt on Amazon

Other tumble dryer parts

Tumble Dryer Heater Element

Provides the heat that dries the clothes.

Guide, symptoms & how to fit

Tumble Dryer Thermostat

Thermostats and thermal cut-outs limit the dryer temperature and switch the heater off if it overheats.

Guide, symptoms & how to fit

Tumble Dryer Condenser

On a condenser dryer, the heat exchanger that cools the humid air so the moisture drains into the tank or away.

Guide, symptoms & how to fit

Tumble Dryer Door Seal

The seal around the dryer door that stops warm, damp air and lint escaping.

Guide, symptoms & how to fit

Tumble Dryer Filter

Catches fluff from clothes so it does not clog the vent or the heat exchanger.

Guide, symptoms & how to fit

Tumble Dryer Drum Rollers

The small wheels that carry the weight of the drum and let it turn smoothly.

Guide, symptoms & how to fit

Tumble Dryer Motor

Turns the drum (through the belt) and drives the fan that circulates air.

Guide, symptoms & how to fit

Tumble Dryer Capacitor

A start capacitor that gives the motor the push it needs to begin turning.

Guide, symptoms & how to fit

Tumble Dryer Drum Bearing

The bearing or support that holds the rear of the drum and lets it turn smoothly.

Guide, symptoms & how to fit

Tumble Dryer Tension Pulley

The spring-loaded pulley that keeps the drive belt tight against the motor.

Guide, symptoms & how to fit

Tumble Dryer Control Board

The electronic control board (PCB) that reads the dials, buttons and sensors and switches the motor, heater, pump and valves.

Guide, symptoms & how to fit

Tumble Dryer Door Handle

The handle (or door catch) used to open and close the appliance door.

Guide, symptoms & how to fit

Tumble Dryer Door Hinge

Holds the door on the appliance and lets it swing open and shut.

Guide, symptoms & how to fit