Compatible
WE12M29 WE03X29897 WE12X21574 Dryer Drum Drive Belt by Blutoget Replace WE12M22 137292700 WE120122 AP4565702…
| Part type | Dryer Drive Belt |
|---|---|
| Made by | Blutoget |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WE12M29 |
| Also listed as | WE03X29897, WE12X21574, WE12M22, AP4565702, AP7012633, PS16542496, EAP16542496, WE12M0022, WE12M33, WE21M29 |
| Model numbers named in the listing | GFD40ESCM1WW, VTD52EASR0WB, PTD60EBPR1DG, PTD60GBSR1WS, GTD45GASJ3WS, HTDP120ED0WW, HTDP120ED3WW, HTDP120ED4WW, HTDP120ED5WW, HTDP120ED6WW |
What it fixes
The long belt that loops around the drum and is turned by the motor, so the drum tumbles. Fit it if you see:
- The motor runs but the drum does not turn
- A thumping or flapping noise as the drum spins
- A smell of burning rubber
- The belt looks frayed, stretched or has snapped
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: GFD40ESCM1WW, VTD52EASR0WB, PTD60EBPR1DG, PTD60GBSR1WS, GTD45GASJ3WS, HTDP120ED0WW, HTDP120ED3WW, HTDP120ED4WW, HTDP120ED5WW, HTDP120ED6WW
From the seller’s listing:
- √ HIGH COMPATIBILITY :WE12M29 (137292700) dryer drum drive belt is same to 137292700 drive belt , dryer drum belt we12m29 can be applied as model 137292700. ◀WE03X29897 dryer belt fit for most top brand dryers GE, Hotpoint, Kenmore etc.…
- √ FIT MODELS :▶Ge dryer belt WE03X29897 WE12M29 137292700 work for GE Dryers GFD40ESCM1WW, VTD52EASR0WB, NTX62G8ST0WW, PTD60EBPR1DG, PTD60GBSR1WS, GTD45GASJ3WS etc. ▶Hotpoint Dryer Belt We12m29 fit for HTDP120ED0WW, HTDP120ED3WW,…
Other part numbers it is listed as replacing: WE03X29897, WE12X21574, WE12M22, AP4565702, AP7012633, PS16542496, EAP16542496, WE12M0022, WE12M33, WE21M29. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the dryer
- Remove the top, front or back panel as needed for your model
- Release the tension on the idler pulley and remove the old belt
- Loop the new belt around the drum with the ribbed side against the drum, then around the idler and the motor pulley
- Check the belt sits straight, refit the panels and test
Difficulty: Moderate. Typical time: 45 to 90 minutes. Read the full dryer drive belt guide, including checks to run before you buy.
Safety. Unplug the dryer before you start (and switch off the breaker if it is hard-wired). A blocked vent is a fire risk, so always clear the cause of any overheating.
Other dryer drive belt listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
