HotpointSpares
Store › USA › Refrigerator Parts › Refrigerator Control Board › WR55X43825
WR55X43825 Refrigerator Control Board WR55X33653 Main Control Board…
Compatible

WR55X43825 Refrigerator Control Board WR55X33653 Main Control Board W/LED Lights Fits for GE Hotpoint…

Part typeRefrigerator Control Board
Made byCAMOLIKOS
Genuine or compatibleCompatible equivalent (made by another company)
Main part numberWR55X43825
Also listed asWR55X33653, WR55X31087, WR55X32405, WR55X33565, WR55X33566, WR55X33567, WR55X33568, WR55X33569, WR55X33570, WR55X33571, WR55X33572, WR55X33573, WR55X33574, WR55X33645
Model numbers named in the listingGTS22KYNDRFS, GTS22KGNCRWW, GTS22KGNCRBB, GTS22KSNCRSS, GTS22KMNCRDS, GTS22KYNCRFS, GTS22KMNCRES, XRS22KGADWW, XRS22KGADBB, XRS22KGADSS

View on Amazon

What it fixes

The electronic control board (PCB) that reads the dials, buttons and sensors and switches the motor, heater, pump and valves. Fit it if you see:

Will it fit your appliance?

This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.

Model numbers named in the listing: GTS22KYNDRFS, GTS22KGNCRWW, GTS22KGNCRBB, GTS22KSNCRSS, GTS22KMNCRDS, GTS22KYNCRFS, GTS22KMNCRES, XRS22KGADWW, XRS22KGADBB, XRS22KGADSS

From the seller’s listing:

Other part numbers it is listed as replacing: WR55X33653, WR55X31087, WR55X32405, WR55X33565, WR55X33566, WR55X33567, WR55X33568, WR55X33569, WR55X33570, WR55X33571, WR55X33572, WR55X33573, WR55X33574, WR55X33645. Matching one of these to the number on your old part is the most reliable check.

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

How to fit it

  1. Unplug the appliance (and turn the water off if it has a water supply)
  2. Remove the panel to reach the board and photograph every connector and its position
  3. Unplug the connectors and release the board from its clips or screws
  4. Fit the new board with the connectors in exactly the same positions
  5. Refit the panel, restore power and run a short test

Difficulty: Moderate. Typical time: 30 to 60 minutes. Read the full refrigerator control board guide, including checks to run before you buy.

Safety. Unplug the appliance before you start and keep food cold elsewhere while you work. Never pierce the sealed cooling system.

Other refrigerator control board listings

Genuine made by Hotpoint / GE   Compatible made by another company to fit