Compatible
WR55X43825 WR55X33653 Refrigerator Control Board Compatible With GE Hotpoint Replaces WR55X31087 WR55X32405…
| Part type | Refrigerator Control Board |
|---|---|
| Made by | SURPOUF |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WR55X43825 |
| Also listed as | WR55X33653, WR55X31087, WR55X32405, WR55X33565 |
| Model numbers named in the listing | GTS22KGNCRWW, GTS22KGNCRBB, GTS22KSNCRSS, GTS22KMNCRDS, GTS22KYNCRFS, GTS22KMNCRES, XRS22KGADWW, XRS22KGADBB, XRS22KGADSS, GTS22KMNDRDS |
What it fixes
The electronic control board (PCB) that reads the dials, buttons and sensors and switches the motor, heater, pump and valves. Fit it if you see:
- The appliance is completely dead, or the display is blank or garbled
- Buttons or the programme selector do nothing, or the cycle jumps or stops
- A fault code that keeps returning after the named part has been replaced
- Visible scorching, swollen components or a burning smell on the board
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: GTS22KGNCRWW, GTS22KGNCRBB, GTS22KSNCRSS, GTS22KMNCRDS, GTS22KYNCRFS, GTS22KMNCRES, XRS22KGADWW, XRS22KGADBB, XRS22KGADSS, GTS22KMNDRDS
From the seller’s listing:
- WR55X43825 Compatible With GE model…
- WR55X43825 Compatible With Hotpoint model…
Other part numbers it is listed as replacing: WR55X33653, WR55X31087, WR55X32405, WR55X33565. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the appliance (and turn the water off if it has a water supply)
- Remove the panel to reach the board and photograph every connector and its position
- Unplug the connectors and release the board from its clips or screws
- Fit the new board with the connectors in exactly the same positions
- Refit the panel, restore power and run a short test
Difficulty: Moderate. Typical time: 30 to 60 minutes. Read the full refrigerator control board guide, including checks to run before you buy.
Safety. Unplug the appliance before you start and keep food cold elsewhere while you work. Never pierce the sealed cooling system.
Other refrigerator control board listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
