Compatible
WR24X10236 Refrigerator Door Gasket Replacement for GE Hotpoint | Fit GTS18FBSBRCC A3317ABRFRWW; 43′′×26′′…
| Part type | Refrigerator Door Gasket |
|---|---|
| Made by | MOHTOL |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WR24X10236 |
| Also listed as | WR78X10473, WR78X8693, WR24X0558, AP4501105, WR24X10052, WR24X558, WR78X10336, WR78X10406, WR78X8716, WR78X8695, PS2371087, EAP2371087 |
| Model numbers named in the listing | GTS18FBSBRCC |
What it fixes
The magnetic rubber seal that keeps cold air in and warm air out around the door. Fit it if you see:
- Frost or ice building up around the door edge
- Condensation or water pooling inside or beneath
- The compressor runs constantly
- A gap or a door that does not close firmly
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: GTS18FBSBRCC
From the seller’s listing:
- Notice: Most gaskets look similar but are NOT compatible. Must match your fridge's brand, model & gasket part number. 【Product Size】 WR24X10236 refrigerator gasket (white): 43′′ × 26′′. WR24X10236 refrigerator door seal replacement fits…
- 【Applicable Models】WR24X10236 refrigerator seal compatible with GE Hotpoint Kenmore, WR24X10236 fridge door gasket replace AP4501105 1557237 WR24X0558 WR24X10052 WR24X558 WR78X10336 WR78X8693 WR78X10406 WR78X10473 WR78X8716 WR78X8695…
Other part numbers it is listed as replacing: WR78X10473, WR78X8693, WR24X0558, AP4501105, WR24X10052, WR24X558, WR78X10336, WR78X10406, WR78X8716, WR78X8695, PS2371087, EAP2371087. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Warm the new seal in warm water or with a hair dryer so it becomes flexible
- Pull the old seal out of its channel, or unscrew the retaining strip if there is one
- Clean the channel
- Press the new seal in, starting at the top corners
- Close the door, warm any creases with a hair dryer and let it settle
Difficulty: Easy to moderate. Typical time: 20 to 40 minutes. Read the full refrigerator door gasket guide, including checks to run before you buy.
Safety. Unplug the appliance before you start and keep food cold elsewhere while you work. Never pierce the sealed cooling system.
Other refrigerator door gasket listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
