Compatible
WR24X450 Fresh Door Gasket for GE for Kenmore for Hotpoint Refrigerators | Replacement for WR24X0450,…
| Part type | Refrigerator Door Gasket |
|---|---|
| Made by | Kukushoo |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WR24X450 |
| Also listed as | WR24X0450, WR24X0459, WR24X459, AP2067923, PS296973, EAP296973 |
What it fixes
The magnetic rubber seal that keeps cold air in and warm air out around the door. Fit it if you see:
- Frost or ice building up around the door edge
- Condensation or water pooling inside or beneath
- The compressor runs constantly
- A gap or a door that does not close firmly
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
From the seller’s listing:
- When installing, start at the four corners. Align the raised center portion of the seal with the groove on the refrigerator, then press firmly to secure it in place. If the door seal won’t fit into the groove, use a thin metal strip or a…
- Compatible Part Numbers: Refrigerator Door Gasket compatible with WR24X450, WR24X0450, WR24X0459, WR24X459, PD00001208, AP2067923, PS296973, EAP296973. For most refrigerator models, this gasket is only used for the fresh food compartment.…
Other part numbers it is listed as replacing: WR24X0450, WR24X0459, WR24X459, AP2067923, PS296973, EAP296973. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Warm the new seal in warm water or with a hair dryer so it becomes flexible
- Pull the old seal out of its channel, or unscrew the retaining strip if there is one
- Clean the channel
- Press the new seal in, starting at the top corners
- Close the door, warm any creases with a hair dryer and let it settle
Difficulty: Easy to moderate. Typical time: 20 to 40 minutes. Read the full refrigerator door gasket guide, including checks to run before you buy.
Safety. Unplug the appliance before you start and keep food cold elsewhere while you work. Never pierce the sealed cooling system.
Other refrigerator door gasket listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
