Compatible
Yendse WH23X28418 290D1201G003 WH23X24178 Drain Pump Fit for GE Hotpoint | Replaces 290D1201G001 B40-3A01…
| Part type | Washer Drain Pump |
|---|---|
| Made by | Yendse |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WH23X28418 |
| Also listed as | WH23X24178, AP6889136, PS12723115, WH23X27574, EAP12723115 |
| Model numbers named in the listing | GTW335ASN1WW, GTW720BPN0DG, PTW905BPTDG, GTW460ASJ3WW, HTW200ASK1WW, HTW200ASK2WW, HTW200ASK3WW, HTW200ASK4WW, GTW460ASJ2WW, GTW460ASJ1WW |
What it fixes
Pumps dirty water out of the drum to the waste pipe at the end of each wash and rinse. Fit it if you see:
- Water left standing in the drum at the end of a cycle
- A drain-related fault code or the cycle stopping part-way
- Humming or buzzing from the base with no water leaving
- Grinding or rattling when the pump runs, often from a trapped object
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: GTW335ASN1WW, GTW720BPN0DG, PTW905BPTDG, GTW460ASJ3WW, HTW200ASK1WW, HTW200ASK2WW, HTW200ASK3WW, HTW200ASK4WW, GTW460ASJ2WW, GTW460ASJ1WW
From the seller’s listing:
- Wide Compatibility: 290D1201G003 washer drain pump is used in front-loading washing machines and removes water from the washing machine during the cycle drain. It fits for GTW335ASN1WW GTW720BPN0DG PTW905BPTDG GTW460ASJ3WW HTW200ASK1WW…
- WH23X24178 / 290D1201G001 Pump 365 Days After-sales Service: As the part is not universal, please get in touch with us before ordering if you are not sure if the part you ordered is suitable for your model.Customer satisfaction is our…
Other part numbers it is listed as replacing: WH23X24178, AP6889136, PS12723115, WH23X27574, EAP12723115. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the machine and turn the water off
- Drain what is left through the filter or the emergency drain hose into a shallow tray
- Tilt the machine safely or work from the base or back panel to reach the pump
- Note the hose positions, release the clamps and unplug the pump wiring
- Unclip or unscrew the old pump, fit the new one and refit the hoses and clamps
- Run a short drain-and-spin cycle and check for leaks
Difficulty: Moderate. Typical time: 45 to 90 minutes. Read the full washer drain pump guide, including checks to run before you buy.
Safety. Unplug the machine and turn the water off before you start. Water and electricity: keep the floor dry and never work on a live machine.
Other washer drain pump listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
