Compatible
Upgrade WH23X28418 WH23X24178 290D1201G003 Washer Drain Pump | Compatible with GE Hotpoint, Replaces…
| Part type | Washer Drain Pump |
|---|---|
| Made by | ECHASL |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WH23X28418 |
| Also listed as | WH23X24178, PS12723115, AP6889136, WH23X27574, EAP12723115 |
| Model numbers named in the listing | GTW720BPN0DG, HTW200ASK3WW, GTW460ASJ0WW, GTW680BPL2DG, PTW905BPTDG, GTW335ASN2WW, HTW200ASK1WW, GTW725BSN0WS, GTW460ASJ2WW, GTW335ASNWW |
What it fixes
Pumps dirty water out of the drum to the waste pipe at the end of each wash and rinse. Fit it if you see:
- Water left standing in the drum at the end of a cycle
- A drain-related fault code or the cycle stopping part-way
- Humming or buzzing from the base with no water leaving
- Grinding or rattling when the pump runs, often from a trapped object
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: GTW720BPN0DG, HTW200ASK3WW, GTW460ASJ0WW, GTW680BPL2DG, PTW905BPTDG, GTW335ASN2WW, HTW200ASK1WW, GTW725BSN0WS, GTW460ASJ2WW, GTW335ASNWW
From the seller’s listing:
- Widely Compatible: 290D1201G003 washer drain pump, for models GTW720BPN0DG, HTW200ASK3WW, GTW460ASJ0WW, GTW680BPL2DG, PTW905BPTDG, GTW335ASN2WW, HTW200ASK1WW, GTW725BSN0WS, GTW460ASJ2WW, GTW335ASNWW, HTW200ASK4WW, GTW680BSJ7WS,…
- Installation Note: Before replacing the WH23X28418 or WH23X24178 washer drain pump, verify the washing machine model and original part number to confirm compatibility. Disconnect the power and water supply before installation
Other part numbers it is listed as replacing: WH23X24178, PS12723115, AP6889136, WH23X27574, EAP12723115. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the machine and turn the water off
- Drain what is left through the filter or the emergency drain hose into a shallow tray
- Tilt the machine safely or work from the base or back panel to reach the pump
- Note the hose positions, release the clamps and unplug the pump wiring
- Unclip or unscrew the old pump, fit the new one and refit the hoses and clamps
- Run a short drain-and-spin cycle and check for leaks
Difficulty: Moderate. Typical time: 45 to 90 minutes. Read the full washer drain pump guide, including checks to run before you buy.
Safety. Unplug the machine and turn the water off before you start. Water and electricity: keep the floor dry and never work on a live machine.
Other washer drain pump listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
