Compatible
WH01X27954 WH01X24381 WH02X24399 Washer Lid Lock Switch Washer Lid Lock Bezel Washer Lid Lock Striker…
| Part type | Washer Lid Switch |
|---|---|
| Made by | Saiyugty |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WH01X27954 |
| Also listed as | WH01X24381, WH02X24399, WH01X26114, WH01X24114, AP6331854, WH08X31577, PS11736833, AP6004904, AP5999576, PS11729471 |
What it fixes
On a top-loading washer, the switch that tells the machine the lid is shut so it is safe to agitate and spin. Fit it if you see:
- The washer fills but will not agitate or spin
- The cycle will not start with the lid closed
- The lid latch feels loose, broken or does not click
- The washer stops as soon as the lid is nudged
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
From the seller’s listing:
- 【Replace】The WH01X27954 Washer Lid Lock Switch replaces WH01X26114, WH01X24114, 290D1580P001, 290D1580P002, 290d1580p004, eg-380843m, eg380843m, AP6331854, 290D1580P003, WH08X31577, AP6331854. The WH01X24381 Washer Lid Lock Bezel replaces…
- 【Package include】The package include WH01X27954 Washer Lid Lock Switch, WH02X24399 Washer Lid Lock Striker, WH01X24381 Washer Lid Lock Bezel, Compatible with GE and Hotpoint Top Load Washer.
Other part numbers it is listed as replacing: WH01X24381, WH02X24399, WH01X26114, WH01X24114, AP6331854, WH08X31577, PS11736833, AP6004904, AP5999576, PS11729471. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the washer
- Release the top panel clips with a putty knife and tilt the panel back
- Disconnect and unclip the old lid switch, noting the wire positions
- Fit the new switch, reconnect, and lower the top panel until it clicks
- Plug in and run a short test cycle
Difficulty: Easy to moderate. Typical time: 20 to 40 minutes. Read the full washer lid switch guide, including checks to run before you buy.
Safety. Unplug the machine and turn the water off before you start. Water and electricity: keep the floor dry and never work on a live machine.
Other washer lid switch listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
