Compatible
BUTITNOW WH01X27954 Washer Lid Lock Switch + WH02X24399 Washer Lid Lock Striker + WH01X24381 Washer Lid Lock…
| Part type | Washer Lid Switch |
|---|---|
| Made by | BUTITNOW |
| Genuine or compatible | Compatible equivalent (made by another company) |
| Main part number | WH01X27954 |
| Also listed as | WH02X24399, WH01X24381, WH01X26114, WH01X24114, PS11736833, AP5999576, PS11729471 |
| Model numbers named in the listing | HTW240ASK6WS, HTW200ASK3WW, HTW240ASK5WS, HTW200ASK1WW, HTW200ASK4WW, HTW240ASKOWS, HTW240ASK1WS, HTW240ASK2WS, HTW240ASK3WS, HTW240ASK4WS |
What it fixes
On a top-loading washer, the switch that tells the machine the lid is shut so it is safe to agitate and spin. Fit it if you see:
- The washer fills but will not agitate or spin
- The cycle will not start with the lid closed
- The lid latch feels loose, broken or does not click
- The washer stops as soon as the lid is nudged
Will it fit your appliance?
This is a compatible equivalent made by another company, so fit depends on the model. The details below come from the seller’s own listing and are shown so you can compare them with your rating plate. Always confirm on the Amazon page before you buy.
Model numbers named in the listing: HTW240ASK6WS, HTW200ASK3WW, HTW240ASK5WS, HTW200ASK1WW, HTW200ASK4WW, HTW240ASKOWS, HTW240ASK1WS, HTW240ASK2WS, HTW240ASK3WS, HTW240ASK4WS
From the seller’s listing:
- Fit for Hotpoint: HTW200ASK4WW HTW240ASKOWS HTW240ASK1WS HTW240ASK2WS HTW240ASK3WS HTW240ASK4WS HTW200ASK2WW HTW200ASKOWW HTW240ASK6WS HTW200ASK3WW HTW240ASK5WS HTW200ASK1WW
- Fit for GE: GTW220ACK1WW GTW330ASKWW GTW460ASJ3WW GTW465ASN2WW GTW490ACJ1WS GTW220ACK2WW GTW335ASNOWW GTW460ASJ4WW GTW465ASN3WW GTW490ACJ1WW GTW220ACK3WW GTW335ASN1WW GTW460ASJ5WW GTW485ASJOWS GTW490ACJ2WS GTW220ACK4WW GTW335ASN2WW…
Other part numbers it is listed as replacing: WH02X24399, WH01X24381, WH01X26114, WH01X24114, PS11736833, AP5999576, PS11729471. Matching one of these to the number on your old part is the most reliable check.
Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.
How to fit it
- Unplug the washer
- Release the top panel clips with a putty knife and tilt the panel back
- Disconnect and unclip the old lid switch, noting the wire positions
- Fit the new switch, reconnect, and lower the top panel until it clicks
- Plug in and run a short test cycle
Difficulty: Easy to moderate. Typical time: 20 to 40 minutes. Read the full washer lid switch guide, including checks to run before you buy.
Safety. Unplug the machine and turn the water off before you start. Water and electricity: keep the floor dry and never work on a live machine.
Other washer lid switch listings
Genuine made by Hotpoint / GE Compatible made by another company to fit
