HotpointSpares
Store › UK › Washing Machine Spares

Hotpoint Washing Machine Spares

Door seals, drain pumps, carbon brushes, drum bearings, door locks, shock absorbers, inlet valves and heating elements.

Check your model number first. It is on the rating plate — usually inside the door frame, on the back or side panel, or inside the appliance. Parts that look identical often differ by model, so match the number to the listing before you order.

Choose the part

Washing Machine Door Seal

The rubber gasket (also called a door boot) that seals the gap between the door glass and the drum so water stays in the machine.

Guide, symptoms & how to fit

Washing Machine Drain Pump

Pumps dirty water out of the drum to the waste pipe at the end of each wash and rinse.

Guide, symptoms & how to fit

Washing Machine Carbon Brushes

Carbon blocks that carry current to the spinning part of a brushed (universal) motor. They wear down with use and are designed to be replaced.

Guide, symptoms & how to fit

Washing Machine Drum Bearing Kit

The bearings and seal that let the drum spin smoothly on its shaft while keeping water away from the bearings.

Guide, symptoms & how to fit

Washing Machine Door Lock

The interlock that locks the door during a cycle and tells the control board it is safe to start.

Guide, symptoms & how to fit

Washing Machine Shock Absorbers

The dampers (suspension) that hold the tub and absorb vibration during the spin.

Guide, symptoms & how to fit

Washing Machine Water Inlet Valve

The solenoid valve that opens to let water into the machine at the right moment and closes it afterwards.

Guide, symptoms & how to fit

Washing Machine Heating Element

Heats the water for hot and warm washes.

Guide, symptoms & how to fit

Washing Machine Motor

The electric motor that spins the drum for washing and spinning.

Guide, symptoms & how to fit

Washing Machine Drive Belt

The belt that carries the drive from the motor pulley to the drum pulley.

Guide, symptoms & how to fit

Washing Machine Control Board

The electronic control board (PCB) that reads the dials, buttons and sensors and switches the motor, heater, pump and valves.

Guide, symptoms & how to fit

Washing Machine Detergent Drawer

The drawer and dispenser that carry detergent and softener into the machine with the incoming water.

Guide, symptoms & how to fit

Washing Machine Door Handle

The handle (or door catch) used to open and close the appliance door.

Guide, symptoms & how to fit

Washing Machine Door Hinge

Holds the door on the appliance and lets it swing open and shut.

Guide, symptoms & how to fit

Washing Machine Hose

The inlet or drain hose that carries water to and from the appliance.

Guide, symptoms & how to fit

Washing Machine Temperature Sensor

The thermistor or thermostat that tells the machine how hot the water is, so it can heat to the right temperature.

Guide, symptoms & how to fit