Hotpoint Washing Machine Door Hinge
Holds the door on the appliance and lets it swing open and shut.
Signs it has failed
- A door that sags or does not close squarely
- A clunking or loose feeling when the door opens
- A broken hinge pin or spring
- Water or heat leaking around a door that no longer seals
Check before you buy
- Open the door and lift it gently: movement at the hinge points to wear
- Check the springs, cables or pins for breakage
- Check the door seal is not the real cause of the leak
What replacing it fixes: if the signs above match your washing machine and the checks point to this part, fitting a new one should clear those faults. If the symptoms continue, the cause is elsewhere (a control board, a sensor or a blocked vent or hose).
How to replace it
- Unplug the appliance
- Support the door and remove the fixings or hinge pins as the manual shows
- Take off the old hinge and fit the new one in the same position
- Refit the door and check it closes evenly
- Test a short cycle or heat-up
Guide steps are typical for this type of part. Layouts differ between models, so follow your own manual where it differs.
Getting the right part
Hinges differ by side, spring and fixing. Match the part number, your model number and whether you need the left or right hand part. Door hinges can be heavy, so support the door while you work.
Part numbers listed for Hotpoint washing machine door hinge
These are manufacturer part numbers that a UK spares retailer lists as Hotpoint washing machine door hinge parts (checked 2026-10-29). Fit is per model: a number here is a lead to check against your own rating plate, not a promise it fits your machine. Searching the exact number is the most reliable way to find the right part. The retailer lists 21 Hotpoint numbers for this part type; 10 are shown, because most fit only specific models. Search with your model number to narrow it down.
| Part number | Listed as | Retailer says it fits | |
|---|---|---|---|
| C00666271 | Hotpoint Cupboard Door Hinge Kit | — | Search on Amazon |
| C00119413 | Hotpoint Door Hinge | — | Search on Amazon |
| C00255430 | Hotpoint Door Hinge | — | Search on Amazon |
| 481941718939 | Hotpoint Cupboard Door Hinge | — | Search on Amazon |
| C00285560 | Hotpoint Door Hinge | — | Search on Amazon |
| C00064541 | Hotpoint Integrated Door Hinge | — | Search on Amazon |
| C00290793 | Hotpoint Door Hinge Bolt | — | Search on Amazon |
| C00096210 | Hotpoint Self Tapping Screw Hinge | — | Search on Amazon |
| C00271424 | Hotpoint Integrated Door Hinge Fixing Screw | — | Search on Amazon |
| C00372855 | Hotpoint Door Hinge | — | Search on Amazon |
Some numbers are used across Hotpoint, Indesit, Creda and other Whirlpool-group brands. Numbers starting C00 are the Hotpoint/Indesit manufacturer reference format. If your old part has a number printed on it, match that first.
Find it on Amazon
This opens an Amazon search for the part so you see what is in stock for your model today. Look for your model number in the listing title or the “compatible models” section, and prefer sellers who state it explicitly.
Search washing machine door hinge on Amazon
Other washing machine parts
Washing Machine Door Seal
The rubber gasket (also called a door boot) that seals the gap between the door glass and the drum so water stays in the machine.
Guide, symptoms & how to fitWashing Machine Drain Pump
Pumps dirty water out of the drum to the waste pipe at the end of each wash and rinse.
Guide, symptoms & how to fitWashing Machine Carbon Brushes
Carbon blocks that carry current to the spinning part of a brushed (universal) motor. They wear down with use and are designed to be replaced.
Guide, symptoms & how to fitWashing Machine Drum Bearing Kit
The bearings and seal that let the drum spin smoothly on its shaft while keeping water away from the bearings.
Guide, symptoms & how to fitWashing Machine Door Lock
The interlock that locks the door during a cycle and tells the control board it is safe to start.
Guide, symptoms & how to fitWashing Machine Shock Absorbers
The dampers (suspension) that hold the tub and absorb vibration during the spin.
Guide, symptoms & how to fitWashing Machine Water Inlet Valve
The solenoid valve that opens to let water into the machine at the right moment and closes it afterwards.
Guide, symptoms & how to fitWashing Machine Heating Element
Heats the water for hot and warm washes.
Guide, symptoms & how to fitWashing Machine Motor
The electric motor that spins the drum for washing and spinning.
Guide, symptoms & how to fitWashing Machine Drive Belt
The belt that carries the drive from the motor pulley to the drum pulley.
Guide, symptoms & how to fitWashing Machine Control Board
The electronic control board (PCB) that reads the dials, buttons and sensors and switches the motor, heater, pump and valves.
Guide, symptoms & how to fitWashing Machine Detergent Drawer
The drawer and dispenser that carry detergent and softener into the machine with the incoming water.
Guide, symptoms & how to fitWashing Machine Door Handle
The handle (or door catch) used to open and close the appliance door.
Guide, symptoms & how to fitWashing Machine Hose
The inlet or drain hose that carries water to and from the appliance.
Guide, symptoms & how to fitWashing Machine Temperature Sensor
The thermistor or thermostat that tells the machine how hot the water is, so it can heat to the right temperature.
Guide, symptoms & how to fit